BMWLT - Y-1, BURNISHINE PUTZ POMADE
- MSDS: BMWLT
- Manufacturer: AM INTERNATIONAL INC
- Product Name: Y-1, BURNISHINE PUTZ POMADE
- National Stock Number: 6850-01-222-5537
Product Identification
Product ID:Y-1, BURNISHINE PUTZ POMADE
MSDS Date:09/01/1986
FSC:6850
NIIN:01-222-5537
MSDS Number: BMWLT
Responsible Party
MT PROSPECT, IL 60056
US
Emergency Phone: 312-583-1810;312-398-1900
Info Phone: 312-583-1810
Cage: DO022
Contractor
Telephone: 847-375-1700
Cage: 09177
Ingredients
IRON (III) OXIDE
CAS: 1309-37-1
RTECS: NO7400000
Fraction By Weight: 40%
OSHA PEL 10 MG/M3 (FE)
ACGIH TLV: 5 MG/M3(FE),B2; 9293
HYDROCARBON OILS
CAS: 68131-05-5
Fraction By Weight: 40%
KEROSENE
CAS: 8008-20-6
RTECS: OA5500000
Fraction By Weight: 7%
ACGIH TLV: 100 PPM
EMULSIFIERS
Fraction By Weight: 2%
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE:MAY CAUSE IRRITATION. SKIN:MINOR
IRRITATION. INGEST:MAY CAUSE GASTRO-INTESTINAL IRRITATION. TARGET
ORGANS:SKIN, EYES, RESPIRATORY SYSTEM, CNS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NOT APPLICABLE.
First Aid
First Aid:EYE:FLUSH WITH COPIOUS AMOUNTS OF WATER FOR AT LEAST 15
MINUTES. SKIN:WASH WITH SOAP & WATER. INHAL:MOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE O*2/ARTF RESP) . INGEST:GET MD.
Fire Fighting
Flash Point:NONE
Extinguishing Media:CO*2, FOAM.
Fire Fighting Procedures:SAME AS FOR OIL OR GREASE FIRE. WEAR
NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:SCOOP OR WIPE SURFACES DRY. SHOULD BE
NON-HAZARDOUS WASTE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID FREEZING. STORE AWAY FROM
EXCESSIVE HEAT AND FLAMES.
Other Precautions:READ AND FOLLOW PRECAUTIONS ON LABEL. DO NOT REUSE
CONTAINERS.
Exposure Controls
Respiratory Protection:NOT REQUIRED.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Boiling Pt:B.P. Text:220F,104C
Spec Gravity:>1 (H*2O=1)
Solubility in Water:SLIGHT
Appearance and Odor:VISCOUS RED PASTE, OILY ODOR
Stability
Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NOT APPLICABLE.
Hazardous Decomposition Products:NOT APPLICABLE.
Disposal
Waste Disposal Methods:DISPOSE OF IN CONFORMANCE WITH FEDERAL, STATE,
AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.